m4 sliding stock take down

hi just a simple take down of a m4 sliding stock ( for all bar ics )

First pull the stock catch down away from the stock as far as it will go and slide the stock off the tube :


then useing a allen key remove the allen nut and take off the stock tbe end cap



then if you look down the stock tube you will see a screw head that goes in to your gearbox remove this " + " driver



the stock tube will now slide off the back of your body




should only take 5min to do and putting it back together is just the same

tools needed are :
allen key set
long large " + " screw driver