ebanned's MK18rasII on a G&P

Hi all this came the other day from are oversea's friends Ebanned .

On taking it out of the big jiffy postal bag i have a large silver bag with a clear see through front to it with a small label in the left hand corner with

MK 18rasII
Aircraft Specification Flat Dark
Earth Anodizing
Weighs only 14.5 ozs!
Length: 9.5 Inches
Width: 2.2Inches

it has a very bad copy of a photo of the kit on it and the web address http://www.yzh.hk

on getting it out I'm very impressed with the finnish of the parts , it comes with

upper ras
lower ras
delta nut
ras attachment plate
and 4 allen type nuts

It has Full trades and rail markings , The gun i used to fit this was a G&P new body and KA steel 10.5 Inch barrel set

now to fitting first you have to fit the ras attachment plate then the barrel and then the nut this is when my problems first started , The ras nut is made of wot looks to be steel and would only go 1 half of a turn on to the G&P threads , on looking a little closer the G&P threads seemed to be to high for the nut so out came the file set ... 1and a half hours later and 1 or 2 cuts the nut started to fit . I must warn you that you need AR barrel spanners for this job as its very tight to get the nut on

once the nut had been fitted and there was no barrel wobble it was just a matter of fitting the upper ras and there was no problems in fitting just 4 allen type nuts and it was on the lower part of the ras just slide on inside the top top half and is held in with 6 screws but once its all together its rock solid

you will need a low profile gas block to fit under the ras

tools needed
2 in 1 Wrench Tool set
file set ( if fitting to a G&P body unsure of other types )
allen key set
screw driver set


After its all been fitted i looked at it and thought .. i like the MoD0 set up more ! as ras's go its a nice bit of kit but if your wanting to build a block1 copy this is for you

Lovely bit of kit johnny, but the price makes me eyes water!

(I'm a low cost ACM/Dboys buying lowlife)

i have just started to go the ACM way with some bits with this and the Dboys ras and im more than happy with them , just seen this kit is now on ebay cheaper than ebaybanned